Safe and successful pregnancy following breast cancer treatment in young patients 35 years old or under without invasive fertility preservation: a retrospective study.

Purpose: Recent advances in the treatment of breast cancer have led to the improvement of breast cancer patient's survival. With the prolonged survival of these patients, pregnancy became an important issue, especially in young cancer patient aged 35 years or under. Increased hormone levels during pregnancy, however, raise concerns about elevating the risk of cancer recurrence. The aim of this study was to validate the notion of increased risk associated with pregnancy after breast cancer treatment in young patients. Methods: From January 2009 to December 2020, newly diagnosed breast cancer patients 35 years old or under who underwent optimal surgery in Korea University Guro Hospital were enrolled in this study. Patients were categorized into 3 groups: nulliparous, pregnancy prior to treatment of breast cancer, and patients with pregnancy after breast cancer treatment. Their overall survival and disease-free survival were evaluated. Results: A total of 107 patients were enrolled in this study. Thirteen patients (12.1%) conceived and successfully delivered. The mean follow-up period after surgery was 58.9 (± 33.5) months. There was no significant difference in overall survival (P = 0.608) and disease-free survival (P = 0.591) among different groups. Conclusion: In young patients, pregnancy after treatment for breast cancer did not affect their overall survival or diseasefree survival as compared to nullipara or previously delivered groups. Therefore, pregnancy counseling should not be prevented in young breast cancer patients 35 years old or under.

Efficacy of Learning Disorder Treatment for Reading or Mathematics Disorders: An Open Study.

Objectives: This study aimed to identify the effectiveness of treatment programs for children with reading (RD) or mathematics disorders (MD). Structured treatment programs were developed to improve phonological awareness and number sense among children and adolescents with RD or MD, respectively, and the effectiveness of the learning disorder treatment programs were evaluated. Methods: We used standardized, objective diagnostic, and evaluation tools not only to recruit participants with RD, MD, or comorbid attention deficit and hyperactivity disorder, but also to assess the effectiveness of the treatments regarding both improved core neurocognitive deficits of RD or MD and academic achievement. Forty children with RD or MD received one-on-one treatments from therapists. Results: In the RD group, treatment effects were observed in all subtests. In the word and paragraph reading tests, the accuracy rates and fluency improved. The results of the phonological working memory test, word-sound correspondence test, and rapid automatic naming tests also improved. In the MD group, the accuracy rate and fluency on the arithmetic test improved. An increase in the accuracy rate in the size and distance comparison tests and a decrease in the error rate in the estimation test were also observed. However, there were no improvements in reaction time in these subtests. Conclusion: Learning disorder treatment programs that focus on improving phonological awareness or number sense in children with RD or MD improved achievement, phonological awareness, and number sense.

A Hybrid Approach for Energy Consumption and Improvement in Sensor Network Lifespan in Wireless Sensor Networks.

In this paper, we propose an improved clustering algorithm for wireless sensor networks (WSNs) that aims to increase network lifetime and efficiency. We introduce an enhanced fuzzy spider monkey optimization technique and a hidden Markov model-based clustering algorithm for selecting cluster heads. Our approach considers factors such as network cluster head energy, cluster head density, and cluster head position. We also enhance the energy-efficient routing strategy for connecting cluster heads to the base station. Additionally, we introduce a polling control method to improve network performance while maintaining energy efficiency during steady transmission periods. Simulation results demonstrate a 1.2% improvement in network performance using our proposed model.

Self-Powered Humidity Sensor Driven by Triboelectric Nanogenerator Composed of Bio-Wasted Peanut Skin Powder.

The increasing number of IoT devices has led to more electronic waste production, which harms the environment and human health. Self-powered sensor systems are a solution, but they often use toxic materials. We propose using biocompatible peanut skin as the active material for a self-powered humidity sensor (PSP-SPHS) through integration with a peanut-skin-based triboelectric nanogenerator (PSP-TENG). The PSP-TENG was characterized electrically and showed promising results, including an open circuit voltage (162 V), short circuit current (0.2 µA), and instantaneous power (2.2 mW) at a loading resistance of 20 MΩ. Peanut skin is a great choice for the sensor due to its porous surface, large surface area, eco-friendliness, and affordability. PSP-TENG was further used as a power source for the PSP-humidity sensor. PSP-SPHS worked as a humidity-dependent resistor, whose resistance decreased with increasing relative humidity (%RH), which further resulted in decreasing voltage across the humidity sensor. This proposed PSP-SPHS exhibited a good sensitivity (0.8 V/RH%), fast response/recovery time (4/10 s), along with excellent stability and repeatability, making it a potential candidate for self-powered humidity sensor technology.

Preparation and Performance Analysis of 3D Thermoformed Fluidic Polymer Temperature Sensors for Aquatic and Terrestrial Applications.

Employing a combination of Polyethylene terephthalate (PET) thermoforming and 3D-printed cylindrical patterns, we carefully engineer a linear resistive temperature sensor. This intricate process involves initial PET thermoforming, yielding a hollow cylindrical chamber. This chamber is then precisely infused with a composite fluid of graphite and water glue. Ensuring electrical connectivity, both ends are affixed with metal wires and securely sealed using a hot gun. This cost-effective, versatile sensor adeptly gauges temperature shifts by assessing composite fluid resistance alterations. Its PET outer surface grants immunity to water and solubility concerns, enabling application in aquatic and aerial settings without extra encapsulation. Rigorous testing reveals the sensor's linearity and stability within a 10 °C to 60 °C range, whether submerged or airborne. Beyond 65 °C, plastic deformation arises. To mitigate hysteresis, a 58 °C operational limit is recommended. Examining fluidic composite width and length effects, we ascertain a 12 Ω/°C sensitivity for these linear sensors, a hallmark of their precision. Impressive response and recovery times of 4 and 8 s, respectively, highlight their efficiency. These findings endorse thermoforming's potential for fabricating advanced temperature sensors. This cost-effective approach's adaptability underscores its viability for diverse applications.

Efficacy of a continuous wound infiltration system for postoperative pain management in gynecologic patients who underwent single-port access laparoscopy for adnexal disease.

Introduction: Single-port access (SPA) laparoscopy requires only one incision, unlike conventional laparoscopy. However, its umbilical incision is larger than that of conventional laparoscopy and can be vulnerable to postoperative pain. This study aimed to evaluate whether simultaneous use of a continuous wound infiltration (CWI) system and intravenous patient-controlled analgesia (IV PCA) effectively decreases surgical site pain in patients who underwent SPA laparoscopy due to gynecologic adnexal disease. Methods: A total of 371 patients who underwent SPA laparoscopy and who received IV PCA or CWI was retrospectively reviewed (combined group [CWI + IV PCA, n = 159] vs. PCA group [IV PCA only, n = 212]). To evaluate postoperative pain management, the numeric rating scale (NRS) pain score after surgery, total amount of fentanyl administered via IV PCA, and additional pain killer consumption were collected. Results: The NRS scores at 12 h (1.90 ± 1.11 vs. 2.70 ± 1.08, p < 0.001) and 24 h (1.82 ± 0.82 vs. 2.11 ± 1.44, p = 0.026) after surgery were significantly lower in the combined group than in the PCA group. The total amount of PCA fentanyl was significantly smaller in the combined group than in the PCA group (p < 0.001). The total quantity of rescue analgesics was smaller in the combined group than in the PCA group (p < 0.05). Conclusion: Combined use of the CWI system and IV PCA is an effective postoperative pain management strategy in patient who underwent SPA laparoscopy for adnexal disease.

Oncogenic Impact of TONSL, a Homologous Recombination Repair Protein at the Replication Fork, in Cancer Stem Cells.

We investigated the role of TONSL, a mediator of homologous recombination repair (HRR), in stalled replication fork double-strand breaks (DSBs) in cancer. Publicly available clinical data (tumors from the ovary, breast, stomach and lung) were analyzed through KM Plotter, cBioPortal and Qomics. Cancer stem cell (CSC)-enriched cultures and bulk/general mixed cell cultures (BCCs) with RNAi were employed to determine the effect of TONSL loss in cancer cell lines from the ovary, breast, stomach, lung, colon and brain. Limited dilution assays and ALDH assays were used to quantify the loss of CSCs. Western blotting and cell-based homologous recombination assays were used to identify DNA damage derived from TONSL loss. TONSL was expressed at higher levels in cancer tissues than in normal tissues, and higher expression was an unfavorable prognostic marker for lung, stomach, breast and ovarian cancers. Higher expression of TONSL is partly associated with the coamplification of TONSL and MYC, suggesting its oncogenic role. The suppression of TONSL using RNAi revealed that it is required in the survival of CSCs in cancer cells, while BCCs could frequently survive without TONSL. TONSL dependency occurs through accumulated DNA damage-induced senescence and apoptosis in TONSL-suppressed CSCs. The expression of several other major mediators of HRR was also associated with worse prognosis, whereas the expression of error-prone nonhomologous end joining molecules was associated with better survival in lung adenocarcinoma. Collectively, these results suggest that TONSL-mediated HRR at the replication fork is critical for CSC survival; targeting TONSL may lead to the effective eradication of CSCs.

Spatial and PMF analysis of particle size distributions simultaneously measured at four locations at the roadside of highways.

In urban areas, particulate matter emitted from vehicles directly affects the health of citizens near roads. Thus, in this study, particle size distribution was measured by the horizontal and vertical distances along a highway road with heavy traffic to characterize the dispersion phenomena of particulate matter emitted from vehicles. In addition, the contribution of pollution sources was analyzed using a source-receptor model. A concentration gradient was observed in which the concentration decreased with the increase in the distance from the road when the wind blew from the road to the monitoring locations. The concentration was slightly higher within 50 m of the road when the wind blows parallel to the road, and similar concentrations were found at the other monitoring locations further away from the roads. In particular, the higher the turbulence intensity of the wind, the lower is the concentration gradient coefficient because of the more enhanced mixing and dispersion. A positive matrix factorization (PMF) model with the measured particle size distribution data in the range of 9-300 nm resulted in a contribution of about 70 % (number) and 20 % (mass) to particle concentrations because of six types of vehicles including LPG, two gasoline vehicles (GDI, MPI), and three diesel vehicles with 3rd, 4th, and 5th emission classes. It showed a decrease in the vehicular contribution as the distance from the road increased. Particle number concentrations decreased with increasing altitude up to 30 m above the ground. The results of this study can be useful in deriving generalized gradient equations of particle concentrations exposed by distance and wind direction at the roadside using traffic and meteorological conditions and for establishing environmental policies, such as roadside exposure assessment, in the future. A CAPSULE ABSTRACT: Dispersion of particles emitted from vehicles on a busy highway was characterized by roadside measurements of horizontal and vertical profiles of particle size distributions measured at four locations. The source profiles and contributions were estimated by major sources using a source-receptor model such as PMF.

Quasi-seamless stitching for large-area micropatterned surfaces enabled by Fourier spectral analysis of moiré patterns.

The main challenge in preparing a flexible mold stamp using roll-to-roll nanoimprint lithography is to simultaneously increase the imprintable area with a minimized perceptible seam. However, the current methods for stitching multiple small molds to fabricate large-area molds and functional surfaces typically rely on the alignment mark, which inevitably produces a clear alignment mark and stitched seam. In this study, we propose a mark-less alignment by the pattern itself method inspired by moiré technique, which uses the Fourier spectral analysis of moiré patterns formed by superposed identical patterns for alignment. This method is capable of fabricating scalable functional surfaces and imprint molds with quasi-seamless and alignment mark-free patterning. By harnessing the rotational invariance property in the Fourier transform, our approach is confirmed to be a simple and efficient method for extracting the rotational and translational offsets in overlapped periodic or nonperiodic patterns with a minimized stitched region, thereby allowing for the large-area and quasi-seamless fabrication of imprinting molds and functional surfaces, such as liquid-repellent film and micro-optical sheets, that surpass the conventional alignment and stitching limits and potentially expand their application in producing large-area metasurfaces.

Dual Impact of IGF2 on Alveolar Stem Cell Function during Tobacco-Induced Injury Repair and Development of Pulmonary Emphysema and Cancer.

Pulmonary emphysema is a destructive inflammatory disease primarily caused by cigarette smoking (CS). Recovery from CS-induced injury requires proper stem cell (SC) activities with a tightly controlled balance of proliferation and differentiation. Here we show that acute alveolar injury induced by two representative tobacco carcinogens, 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone and benzo[a]pyrene (N/B), increased IGF2 expression in alveolar type 2 (AT2) cells to promote their SC function and facilitate alveolar regeneration. Autocrine IGF2 signaling upregulated Wnt genes, particularly Wnt3, to stimulate AT2 proliferation and alveolar barrier regeneration after N/B-induced acute injury. In contrast, repetitive N/B exposure provoked sustained IGF2-Wnt signaling through DNMT3A-mediated epigenetic control of IGF2 expression, causing a proliferation/differentiation imbalance in AT2s and development of emphysema and cancer. Hypermethylation of the IGF2 promoter and overexpression of DNMT3A, IGF2, and the Wnt target gene AXIN2 were seen in the lungs of patients with CS-associated emphysema and cancer. Pharmacologic or genetic approaches targeting IGF2-Wnt signaling or DNMT prevented the development of N/B-induced pulmonary diseases. These findings support dual roles of AT2 cells, which can either stimulate alveolar repair or promote emphysema and cancer depending on IGF2 expression levels. SIGNIFICANCE: IGF2-Wnt signaling plays a key role in AT2-mediated alveolar repair after cigarette smoking-induced injury but also drives pathogenesis of pulmonary emphysema and cancer when hyperactivated.

Sarcoid Heart Disease: Review of Current Knowledge.

Sarcoidosis is a granulomatous disease with the potential of multiple organ system involvement and its etiology remains unknown. Cardiac involvement is associated with worse clinical outcome, and has been reported to be 20-30% in white and as high as 58% in Japanese populations with sarcoidosis. Clinical manifestations of cardiac sarcoidosis highly depend on the extent and location of granulomatous inflammation. The most frequent presentations include heart block, tachyarrhythmia, or heart failure. Endomyocardial biopsy is the most specific diagnostic test, but has poor sensitivity due to often patchy involvement. The diagnosis of cardiac sarcoidosis remains challenging due to nonspecific imaging findings. Both 18 F-fluorodeoxyglucose-positron emission tomography (FDG-PET) and cardiac magnetic resonance imaging can be used to evaluate cardiac sarcoidosis, but evaluate different stages of the disease process. FDG-PET detects metabolically active inflammatory cells while cardiac magnetic resonance imaging with late gadolinium enhancement reveals areas of myocardial necrosis and fibrosis. Aggressive therapy of symptomatic cardiac sarcoidosis is often sought due to the high risk of sudden death and/or progression to heart failure. Prednisone 20-40 mg a day is the recommended initial treatment. In refractory or severe cases, higher doses of prednisone, 1-1.5 mg/kg/d (or its equivalent) and addition of a steroid-sparing agent have been utilized. Methotrexate is added most commonly. Long-term improvement has been reported with the use of a combination of weekly methotrexate and prednisone versus prednisone alone. After initiation of treatment, a cardiac FDG-PET scan may be performed 2-3 months later to assess treatment response.

Screening of the siGPCR library in combination with cisplatin against lung cancers.

The screening of siRNAs targeting 390 human G protein-coupled receptors (GPCRs) was multiplexed in combination with cisplatin against lung cancer cells. While the cell viability measure hardly captured the anticancer effect of siGPCRs, the direct cell count revealed the anticancer potential of diverse GPCRs (46 hits with > twofold growth inhibition, p-value < 0.01). In combined treatment with cisplatin, siRNAs against five genes (ADRA2A, F2RL3, NPSR1, NPY and TACR3) enhanced the anti-proliferation efficacy on cancer cells and reduced the self-recovery ability of surviving cells after the removal of the combined treatment. Further on-target validation confirmed that the knockdown of TACR3 expression exhibited anticancer efficacy under both single and combined treatment with cisplatin. Q-omics ( http://qomics.io ) analysis showed that high expression of TACR3 was unfavorable for patient survival, particularly with mutations in GPCR signaling pathways. The present screening data provide a useful resource for GPCR targets and biomarkers for improving the efficacy of cisplatin treatment.

The First Evaluation of Proteinase K-Resistant Prion Protein (PrPSc) in Korean Appendix Specimens.

Background and Objectives: Prion diseases are fatal neurodegenerative disorders caused by the abnormal proteinase K-resistant prion protein (PrPSc). Since variant Creutzfeldt-Jakob disease (CJD) was first reported in the United Kingdom (UK) in 1996, the occurrence of variant CJD has been reported in over 10 countries. To date, variant CJD has not been reported in Korea. However, the E211K somatic mutation in the prion protein gene (PRNP), which is related to bovine spongiform encephalopathy (BSE), was reported in Korean Holstein cattle, and atypical BSE, which is supposed to be sporadic BSE, has been occurring in many countries, including Japan and the USA. These results suggest that BSE may occur naturally in Korea. Thus, we performed a preemptive PrPSc test in appendix specimens to diagnose variant CJD in a Korean population. Materials and Methods: In the present study, we investigated CJD-related mutations and polymorphisms of the PRNP gene and carried out an examination on PrPSc in appendix specimens of Korean patients after appendectomy. Results: In all Korean appendix specimens tested, PrPSc bands were not detected. Conclusion: To the best of our knowledge, this was the first evaluation of PrPSc in Korean appendix specimens.

All-Printed Flexible Memristor with Metal-Non-Metal-Doped TiO2 Nanoparticle Thin Films.

A memristor is a fundamental electronic device that operates like a biological synapse and is considered as the solution of classical von Neumann computers. Here, a fully printed and flexible memristor is fabricated by depositing a thin film of metal-non-metal (chromium-nitrogen)-doped titanium dioxide (TiO2). The resulting device exhibited enhanced performance with self-rectifying and forming free bipolar switching behavior. Doping was performed to bring stability in the performance of the memristor by controlling the defects and impurity levels. The forming free memristor exhibited characteristic behavior of bipolar resistive switching with a high on/off ratio (2.5 × 103), high endurance (500 cycles), long retention time (5 × 103 s) and low operating voltage (±1 V). Doping the thin film of TiO2 with metal-non-metal had a significant effect on the switching properties and conduction mechanism as it directly affected the energy bandgap by lowering it from 3.2 eV to 2.76 eV. Doping enhanced the mobility of charge carriers and eased the process of filament formation by suppressing its randomness between electrodes under the applied electric field. Furthermore, metal-non-metal-doped TiO2 thin film exhibited less switching current and improved non-linearity by controlling the surface defects.

Under- and Normal-Weight Patients Are More Susceptible to Recurrence of Phyllodes Tumor.

Purpose: Phyllodes tumors (PTs) of the breast are rare fibroepithelial neoplasms, and factors associated with the recurrence of PTs are poorly understood. This study sought to identify clinicopathological factors associated with the recurrence of PTs. Method: From January 2009 to December 2019, we identified 100 patients who underwent definitive surgery for PT. Clinicopathological risk factors associated with the recurrence of PT were assessed. Results: The median age of the patients was 44 y (range, 19-62 y), and the median tumor size was 4 cm (0.8-30 cm). At a median follow-up of 26.7 mo (0-103 mo), 22 of the 100 patients experienced local recurrence. In the univariate and multivariate analyses, body mass index ≥ 23 kg/m2 (P = 0.042 in the univariate analysis; P = 0.039 in the multivariate analysis), tumor size ≥ 5 cm (P = 0.006 in the univariate analysis; P = 0.036 in the multivariate analysis), and the presence of stromal overgrowth (P = 0.032 in the univariate analysis; P = 0.040 in the multivariate analysis) were associated with an increased risk of local recurrence. Resection margins and grade were not associated with local recurrence. Conclusion: Normal- or underweight patients and those with larger tumor sizes were more prone to local recurrence. Further larger, multicenter studies with a long-term follow-up are required.

ARL2 is required for homologous recombination repair and colon cancer stem cell survival.

ARL2 regulates the dynamics of cytological components and is highly expressed in colon cancer tissues. Here, we report novel roles of ARL2 in the cell nucleus and colon cancer stem cells (CSCs). ARL2 is expressed at relatively low levels in K-RAS active colon cancer cells, but its expression is induced in CSCs. Depletion of ARL2 results in M phase arrest exclusively in non-CSC cultured cells; in addition, DNA break stress accumulates in CSCs leading to apoptosis. ARL2 expression is positively associated with the expression of all six RAD51 family genes, which are essential for homologous recombination repair (HRR). Furthermore, ARL2 is required for HRR and detected within chromatin compartments. These results demonstrate the requirement of ARL2 in colon CSC maintenance, which possibly occurs through mediating double-strand break DNA repair in the nucleus.

Highly Sensitive and Stable Humidity Sensor Based on the Bi-Layered PVA/Graphene Flower Composite Film.

Two-dimensional (2D) materials and their composites have gained significant importance as the functional layer of various environmental sensors and nanoelectronics owing to their unique properties. This work reports for the first time a highly sensitive, fast, and stable humidity sensor based on the bi-layered active sensing area composed of graphene flower (GF) and poly (vinyl alcohol) PVA thin films for multifunctional applications. The GF/PVA humidity sensor exhibited stable impedance response over 15 days, for a relative humidity (RH) range of (40-90% RH) under ambient operating conditions. The proposed bi-layered humidity sensor also exhibited an ultra-high capacitive sensitivity response of the 29 nF/%RH at 10 kHz and fast transient response of 2 s and 3.5 s, respectively. Furthermore, the reported sensor also showed a good response towards multi-functional applications such as non-contact skin humidity and mouth breathing detection.

Human-robot-robot cooperative control using positioning robot and 1-DOF traction device for robot-assisted fracture reduction system.

While performing musculoskeletal long bone fracture reduction surgery, assistant surgeons can often suffer from physical fatigue as they provide resistance against the tension from surrounding muscles pulling on the patient's broken bones. These days, robotic systems are being actively developed to mitigate this physical workload by realigning and holding these fractured bones for surgeons. This has led to one consortium proposing the development of a robot-assisted fracture reduction system consisting of a 6-DOF positioning robot along with a 1-DOF traction device. With the introduction of the 1-DOF traction device, the positioning robot does not have to fight these contraction forces so can be compact improving its maneuverability and overall convenience; however, considering surgeon-robot interactions, this approach adds the requirement of controlling two different types of robots simultaneously. As such, an advanced cooperative control methodology is required to control the proposed bone fracture reduction robot system. In this paper, a human-robot-robot cooperative control (HRRCC) scheme is proposed for collaboration between the surgeon, the positioning robot, and the traction device. First, the mathematical background of this HRRCC scheme is provided. Next, we describe a series of experiments that show how the proposed scheme facilitates a reduction in the load placed on the positioning robot from strong muscular contraction forces making it possible to conduct fracture reduction procedures more safely despite the muscular forces.

Cardiac Manifestations of Systemic Lupus Erythematous: An Overview of the Incidence, Risk Factors, Diagnostic Criteria, Pathophysiology and Treatment Options.

Systemic lupus erythematosus (SLE) is a complex connective tissue disease that can potentially affect every organ of the human body. In some cases, SLE may present with diverse cardiac manifestations including pericarditis, myocarditis, valvular disease, atherosclerosis, thrombosis, and arrhythmias. Heart disease in SLE is associated with increased morbidity and mortality. It is unclear whether traditional treatments for coronary artery disease significantly impact mortality in this population. Current therapeutic agents for SLE include glucocorticoids, hydroxychloroquine, mycophenolate mofetil, azathioprine, methotrexate, cyclophosphamide, and B cell-directed therapies. This article will provide a comprehensive review and update on this important disease state.

Construction of a tunable promoter library to optimize gene expression in Methylomonas sp. DH-1, a methanotroph, and its application to cadaverine production.

BACKGROUND: As methane is 84 times more potent than carbon dioxide in exacerbating the greenhouse effect, there is an increasing interest in the utilization of methanotrophic bacteria that can convert harmful methane into various value-added compounds. A recently isolated methanotroph, Methylomonas sp. DH-1, is a promising biofactory platform because of its relatively fast growth. However, the lack of genetic engineering tools hampers its wide use in the bioindustry. RESULTS: Through three different approaches, we constructed a tunable promoter library comprising 33 promoters that can be used for the metabolic engineering of Methylomonas sp. DH-1. The library had an expression level of 0.24-410% when compared with the strength of the lac promoter. For practical application of the promoter library, we fine-tuned the expressions of cadA and cadB genes, required for cadaverine synthesis and export, respectively. The strain with PrpmB-cadA and PDnaA-cadB produced the highest cadaverine titre (18.12 ± 1.06 mg/L) in Methylomonas sp. DH-1, which was up to 2.8-fold higher than that obtained from a non-optimized strain. In addition, cell growth and lysine (a precursor of cadaverine) production assays suggested that gene expression optimization through transcription tuning can afford a balance between the growth and precursor supply. CONCLUSIONS: The tunable promoter library provides standard and tunable components for gene expression, thereby facilitating the use of methanotrophs, specifically Methylomonas sp. DH-1, as a sustainable cell factory.